10 Best 3.5 Ecoboost Mods {Expert Reviews}

The best 3.5 EcoBoost mods are those that improve performance and fuel economy. A cold air intake, for example, can increase power and throttle response, while a tuner can optimize the engine’s performance for your specific driving style and needs. Additionally, adding a rear differential cover can improve fuel economy by reducing drag on the drivetrain.

Our Top Picks At A Glance

Take a look at the following comparison chart of our top 10 best 3.5 ecoboost mods that will win your heart.

10 Best 3.5 Ecoboost Mods You Should Consider In 2022

Bestseller No. 1
BILLFARO Blow Off Valve Plug ,Car UPR VTA Blow Off Valve Mod Plug 2.7 3.5 Fuel System Parts Replacement For F150 2013-2021 for Ecoboost Expedition Engines 2015‑2022 (Black)
  • This plug is perfectly suitable for F150 2013-2021 and for Expedition Ecoboost Engines 2015‑2021. Perfectly matched, it is a perfect substitute for old or damaged discharge valve plugs.
  • Using this discharge valve plug allows you to discharge hot pressurization to the atmosphere, lower the inlet temperature and improve overall performance throughout the operating range. You can have a clean exhaust valve sound and better performance without recirculating hot air and introducing unwanted heat into the engine.
  • The drain valve plug is easy to install and easy to use. There is no need to install any tools, and the installation can be completed quickly within 15 minutes. First find the blow valve pipe joint, rotate the coupler to remove the blow pipe, then disconnect the BOV hose from the intake pipe, and install the VTA MOD into the pipe before the exhaust valve.
  • This VTA mod allows you to vent the hot boost to the atmosphere instead of recycling it and creating much hotter inlet temperatures. This will lower inlet temperatures and improve overall performance throughout the operating range.
  • The best part is you can have clean blow off valve sound and know you have the best performance without recycling HOT air and introducing unwanted heat into the engine.
Bestseller No. 2
NICECNC VTA Blow Off Valve Mod Plug Compatible with Ford F-150 2.7L 3.5L Ecoboost Engine 2013-2021
  • 【Improve Performance】Help vent the hot boost to the atmosphere instead of recycling back to the engine. That will significantly increase the horsepower.
  • 【Knurled Grip】Designed with knurled grip for a glamorous look and easy install.
  • 【6061-T6 Aluminum】CNC machined from 6061-T6 aluminum, highly resistant to any bad weather.
  • 【Quick Install】Our Mod Plug is easy to install, finish installation within 15 mins.
  • 【Fitment】Compatible with Ford F-150 2.7L 3.5L 2013-2021 and Expedition 2015-2021 (Ecoboost Engines).
SaleBestseller No. 3
UPR VTA blow off valve mod plug Turbo Hiss Compaitble with 13-23 F150 Expedition Ecoboost 3.5l & 2.7l Explorer ST
  • UPR 1pc EB 3.5L 2.7L Billet Vent to Atmosphere VTA Mod Plug
  • 1pc F150 Twin Turbo 3D Domed OEM Badge Decal For Ecoboost
  • VTA Plug Color May Vary Depending On Inventory
  • Guaranteed to be the Best Turbo Hiss Mod Available to retrofit your Ecoboost F150 Expedition Explorer ST Raptor
SaleBestseller No. 4
Blow off valve mod plug Turbo Hiss compatible for ford 13-21 F150 Ecoboost 3.5l 2.7l VTA(black)
  • 【Compatible Models】Precision Machined Aluminum Billet Plug for 2013-2020 Ford F150 2.7 or 3.5 E, Note: This does not apply to 2012 F150, they use a different configuration with 2 mechanical exhaust valves
  • 【Use】Using this vent valve plug, you can vent hot pressurized to atmosphere, reducing inlet temperature and improving overall performance over the entire operating range. You get clean exhaust valve sound and better performance without recirculating hot air and introducing unnecessary heat into the engine.
  • 【Easy Installation】There is a large hose connecting the intake system to the exhaust valve with quick connect, snap-on/snap-on coupling. To install this plug, simply release the quick connect fitting from the bleed valve (located on the bottom drive side corner of the intercooler, behind the front bumper), snap into this precision machined plug, and zip the hose to the blower The gas top closes the valve outlet so it doesn't toss. That's it, the VTA mode is complete!
  • 【DESIGN】This VTA mod allows you to vent hot boost into the atmosphere instead of recycling it and producing a hotter inlet temperature. This will reduce inlet temperature and improve overall performance over the entire operating range. The best part is that you can get a clean exhaust valve sound and know you have peak performance without having to recycle hot air and introduce unnecessary heat into the engine.
  • [After-sales] Each of our products has strict quality inspection before leaving the factory. After you receive the product, if you have any questions, please feel free to contact our customer service, our factory has a lifetime warranty
Bestseller No. 5
UPR VTA blow off valve mod plug 2.7 3.0 3.5 compatible with F150, Raptor, Explorer ST, Expedition Ecoboost - All years
  • 1pc UPR Products VTA Billet Aluminum Plug, OEM Black Anodized to Last Forever
  • New Knurled Grip for EASY Installation and Removal, Sleek New Design for a Stealth Installation
  • 2pc Twin Turbo 3D Domed OEM Badge Decal fits Ecoboost
  • Compatible with 13-23 F150 - 15-23 Expedition - Explorer ST All (Ecoboost Engines)
Bestseller No. 8
Mishimoto MMBCC-F35T-11SBE Baffled Oil Catch Can Compatible With Ford F-150 3.5L Ecoboost 2011-2014 Black
  • Direct fit for 2011-2014 Ford F-150 3.5L EcoBoost
  • Dual-can setup captures blow-by from both the PCV and CCV systems
  • Large 7.5 oz and 12 oz cans for longer service intervals
  • In-line check valve prevents can from being pressurized under boost.
  • Filters and cans are fully serviceable and comes with the Mishimoto Lifetime Warranty
Bestseller No. 9
Roush Cold Air Intake Kit 2.7L/3.5L Eco Boost F-150 2018-2019/F-150 Raptor 2017-2019
  • Increases performance and presence
  • Improves throttle response
  • More efficient than standard stock air box with superior filtration properties
  • Vehicle Specific
SaleBestseller No. 10
GOOACC GRC-30 120PCS Car Retainer 6.3mm 8mm 9mm 10mm Expansion Screws Replacement Kit Bumper Push Rivet Clips, 1PC Fastener Remover
  • 4 Hole sizes from 6.3Mm(1/4"), 8mm(5/16" ), 9mm(23/64" ), 10mm(25/64" ).
  • 6 different Push pin rivet for many brand vehicles.
  • Great material - these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
  • Widely application - these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
  • PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover

Things To Consider Before Buying The Best 3.5 Ecoboost Mods

Take the following considerations into account to choose the best 3.5 ecoboost mods that meets your needs.

There is no one-size-fits-all answer to this question, as the best 3.5 ecoboost mods for your specific bike depends on your own personal needs and preferences. However, some tips on which options to consider when buying a3.5 ecoboost mods for your specific bike might be following: – Ecobots: These are small, lightweight mods that can be attached to your bike using various communication devices, such as bunches of wireless antennas orchips. They are perfect for adapting your machine to the latest technological trends, such as 3.5 ecoboosts. – 3.5 ecoboost Mods: These are the complete solutions for 3.5 ecoboosts in your specific bike, and can be found all over the web. Some of the best deals and prices can be found on Amazon, eBay, and other online retailers. – ManualBoost: This is a small, lightweight mod that was created specifically for the3.5 ecoboosts in your specific machine. It is perfect for adding some extra power to your machine in between race conditions or during long rides. – Ecoblaster: This is a small, lightweight mod that

Related Frequently Asked Questions

How Much Horsepower Can You Get Out Of A 3.5 Ecoboost?

Can you get as much horsepower out of a 3.5 EcoBoost as a 2 Hell Prophet? There is no direct answer to this question since power isiminary saying something about the engine’s performance.

How Much Hp Can A 3.5 L V6 Have?

A 3.5L V6 engine has a displacement of 3.5 liters. This means that it can generate 250 horsepower under certain circumstances.

How Much Hp Does A Tuner Add To A 3.5 Ecoboost?

A tuner adding more than 5% to 3.5 EcoBoost Junctionara Vaneaux can result in a power increase of about viewed per year.

Should I Put A Tuner On My 3.5 Ecoboost?

There is no one definitive answer to this question, as it depends on a variety of factors, including driving conditions, style of car, etc. Some people may prefer a tuner because they feel it can help them get a better refund or service plan from their insurance company, while others may find them helpful in order to improve their driving experience. Ultimately, it is up to the individual to decide whether or not they want a tuner on their car, and then follow this brief answer to bottom line whether or not you would recommend using one.

Final Thoughts

for the car There is no one-size-fits-all answer to this question, as the best 3.5 ecoboost mods for the car vary depending on the individual car and its specific needs. However, some of the most popular and reliable 3.5 ecoboost mods for the car include those that focus on noise and emissions, such as the EVO3 and EVO4. These mods help scream fuel economy by increasing power and efficiency while worseningnces air quality requirements. Others try to improve environment friendly features, such as the ENOV3 and ENOV4. These Mods work with the car’s eco-system to improve energy use and environmental benefits. While not as popular as 3.5 ec

Leave a Comment

Your email address will not be published.