Top 10 Best Sump Pump With Tether Floats To Buy

A sump pump with a tether float is a type of sump pump that has a cable or chain attached to a buoyant object. This allows the pump to be easily retrieved if it becomes submerged in water.

Here Are Our Top 10 Sump Pump With Tether Floats At A Glance

Here is a quick recap of our top 10 picks that lets you compare each item with another and allow you to choose the best one.

Top 10 Best Sump Pump With Tether Floats You Should Go For In 2022

Bestseller No. 1
Float Switch for Sump Pump - 10-Foot Water Level Sensor with Honeywell Microswitch and Adjustable Tether Length for Ground Water Bilge Pump and Water Tank – Non-Corrosive PP Casing, Rated to 13 Amps
  • CONTROL WATER FLOW into and out of tanks and valves with a sump pump float switch by Water Boss. This float level switch helps reduce overflow potential of light to medium amounts of suspended solids.
  • HONEYWELL MICRO SWITCH ensures a high-precision sump pump switch with accurate repeatability and extended life. This water sensing switch is rated up to 13 amps or 1/2 HP and has CE and IEC approvals.
  • NON-CORROSIVE CASING of the Water Boss Float for water tanks and bilge pumps is IP68 rated. Rugged polypropylene construction also makes this water level switch temperature-resistant from 32°F to 140°F.
  • ADJUSTABLE TETHER of its 10-foot PVC jacketed cable makes our automatic bilge switch suitable for an array of applications. Eliminate complex automation with this sump pump replacement float switch.
  • 5-YEAR WARRANTY against manufacturer defects lets you select the Water Boss Sump Pump Float Switch Replacement with confidence. This reliable float switch yields big savings in flood repair costs.
Bestseller No. 2
THE BASEMENT WATCHDOG Model SP-50T 1/2 HP 3,900 GPH at 0 ft and 3,100 GPH at 10 ft Submersible Sump Pump with Tether Float Switch
  • Pumps 3100 GPH at 10 ft. lift, emptying the sump pit quickly (3900 GPH at 0 ft. lift)
  • 1/2 HP, 5.5-Amp energy efficient permanent split-capacitor (PSC) motor provides optimal GPH output
  • Non-corroding, thermoplastic construction for longevity
  • Upper and lower ball bearings for increased efficiency and quiet performance and carbon ceramic shaft seal to protect the motor
  • 10 ft power cord for easy installation
Bestseller No. 3
Wayne RPP50 Cast Iron Sewage Pump with Piggy Back Tether Float Switch, Black
  • 1/2 hp; max. Flow rate is 6200 gallons per hour; 3240 gph at 10 ft. Of discharge lift
  • Durable, cast iron submersible sewage pump
  • 2 in. Npt discharge capable of handling up to 2 in. Solids
  • Ideal for basement or below grade installations
  • Bottom suction design passes solids up to 2 inches large
Bestseller No. 4
Wayne 56835-WYN1 8' Piggy-Back Tether Float Switch (Sewage/Sump) Replacement Part, 1 Count (Pack of 1)
  • For Sump Pumps or Sewage Pumps up to 1/2 HP, 115V, 13 Amp
  • 8' Flexible Rubber Jacket Cord Operates in Sump Basins 14" or Wider
  • Piggyback plug for SPT, and WST sump pumps, as well as EFL and SEL sewage pumps
Bestseller No. 5
Wayne 56835-002 20' Piggy-Back Tether Float Switch (Sump) Replacement Part
  • Country of Origin: UNITED STATES
  • The Package Length of the product is 10 inches
  • The Package Width of the product is 10 inches
  • The Package Height of the product is 6 inches
Bestseller No. 6
Wayne RSP130 Submersible Sump Pump with Piggy Back Tether Float Switch, 1, Port
  • Assembled in the US with foreign and domestic parts.
  • Base suction with debris screen
  • Corrosion resistant, sealed thermoplastic construction
  • Fully submersible
  • Max. Flow rate is 3060 gallons per hour; 2460 gph at 10 ft. Of discharge lift
  • 1-1/2" npt discharge
  • Assembled in the US with foreign and domestic parts.
  • Base suction with debris screen
  • Corrosion resistant, sealed thermoplastic construction
  • Fully submersible
Bestseller No. 7
Everbilt EBFSWPB Tether Float Switch for Sump Pumps
  • Replacement switch for sump and sewage pumps
  • When connecting to a pipe or pump, the float needs 4 in. of tether to operate properly; it must be able to float into an upward position so that the ball bearing inside the switch makes contact to turn the pump on
  • In order for the float to operate freely, the basin should be at least 14 in. wide and 16 in. deep; if not, the float could become stuck on the wall of the sump basin
  • 8 ft. cord
  • Piggyback plug
Bestseller No. 8
PumpSpy Sump Pump Tethered Float Switch - 10' Cord
  • Universal replacement for most tether switch applications
  • Suitable for use with Sump, Sewage, or Effluent Pumps
  • 10 foot power cord with piggyback plug for ease of installation
  • Rated for up to 15 amps
  • Includes hose clamp and cord grip for easy installation onto the pump's discharge pipe
SaleBestseller No. 9
Superior Pump 92005 25' Tethered Float Switch for Sump and Sewage Pump , Black
  • Universal design works with many pumps
  • For use with sump and utility pumps
  • Non-mercury activated switch; Includes mounting clip and clamp
  • 25 ft. SJOW water resistant power cord with piggyback plug; 120 Volt - max pump running current: 10 amps
  • 1 Year warranty
Bestseller No. 10
RainBro 3/4 HP Cast iron submersible sewage pump with 10 ft. piggy back tether float switch, Model# CSE075
  • GREAT PERFORMANCE - 3/4 hp; max. Flow rate is 6400 gallons per hour; pump will lift water up to 29' of vertical height.
  • HIGH CAPACITY - 2 in. discharge capable of handling up to 2 in. Solids.
  • DURABLE - Rugged cast iron construction with 10' power cord length.
  • AUTOMATIC OPERATION - Piggy Back Tether float switch cable length is adjustable for automatic operation.
  • WORRY FREE - 100% factory tested, 2-year manufacturer's warranty.

How To Choose The Best Sump Pump With Tether Floats

Take the following considerations into account to choose the best sump pump with tether floats that meets your needs.

There is no one-size-fits-all buy guide for sump pumps, as the best one will vary depending on your specific needs. However, here are some general tips to help you buy a good sump pump: 1. What type of water is this? 2. What are my likely candidates for Drainage? 3. What is the size of the reservoir? 4. How much power does this have? 5. What is the warranty?

Final Thoughts

A sump pump with tether Floating Systems is the perfect solution for best practices advise when implementing a sump in a décor or home. This pump can be used for general mixing and mobilization work, or forors specific tasks such as sump pump design or infest control. The floating systems make this a durable and reliable tool for the professional contractor and the low price for performance makes it a great option for understated home improvement

Leave a Comment

Your email address will not be published.