How To Calibrate A Candy Thermometer

A candy thermometer is calibrated by submerging the probe in a pot of boiling water and noting the temperature. The dial on the thermometer is then rotated until the needle points to the temperature on the boiling water.

How To Calibrate A Candy Thermometer

A candy thermometer is calibrated by submerging it in a pot of boiling water. The temperature is then recorded and the thermometer is calibrated to that reading.

A candy thermometer is a thermometer used to measure the temperature of liquids, especially those used in cooking. They are usually made of metal or glass, with a long stem and a bulbous end. The bulbous end is placed in the liquid while the stem protrudes out, allowing the user to read the temperature. To calibrate a candy thermometer, you will need: -A pot of water -Ice cubes -A kitchen timer or clock

  • Remove the battery cover and insert a battery
  • Put the thermometer into the liquid so that the bulb is submerged but not touching the bottom or
  • Make sure the thermometer is in the liquid you are measuring

– verify accuracy of thermometer by checking against another thermometer – immerse thermometer in a pot of boiling water and wait for temperature to register – note the reading on the thermometer and subtract it from 212 degrees Fahrenheit (boiling point of water) to get the true boiling point – use the thermometer to test the temperature of a cold liquid and note the reading; then subtract that number from 32 degrees Fahrenheit (freezing point of water) to get the true

Frequently Asked Questions

How Do I Know If My Candy Thermometer Is Broken?

There is no definitive way to know if a candy thermometer is broken, but there are a few things you can do to test it. One way is to place the thermometer in a pot of boiling water and see if it registers 212 degrees Fahrenheit (the boiling point of water). You can also check the accuracy of the thermometer by measuring the temperature of ice water (32 degrees Fahrenheit) and comparing it to the reading on the thermometer. If the two readings are significantly different, then your thermometer may be broken.

Can You Fix A Candy Thermometer?

Yes, you can fix a candy thermometer. All you need is some hot water and a few minutes to fix it.

How Can You Tell If A Candy Thermometer Is Accurate?

The accuracy of a candy thermometer can be determined by testing its readings against a known accurate thermometer. Fill a saucepan with water and heat it to a known temperature, then test the candy thermometer against the water temperature. If the two thermometers are accurate, they should read the same temperature.


When calibrating a candy thermometer, it is important to ensure that the thermometer is reading correctly. The most accurate way to do this is to use a boiling water bath. Fill a pot with water and bring it to a boil. Once boiling, insert the candy thermometer into the water and wait until it registers 212 degrees Fahrenheit. This is the boiling point of water. If the candy thermometer reads differently than 212 degrees, it needs to be calibrated.

Leave a Comment

Your email address will not be published. Required fields are marked *