How To Make A Cutting Board From A Log

A cutting board is a kitchen essential, and there are many ways to make them. This tutorial will show you how to make a cutting board from a log.

How To Make A Cutting Board From A Log

1. Cut off a section of log that is flat on one side and at least 12″ wide. 2. Cut the log into two even halves using a chainsaw or other power saw. 3. From one half of the log, cut a piece that is 8-10″ wide and 12-16″ long. This will be your cutting board. 4. Use a power saw to cut off the rounded edges of the board, so that it is a square or

a chainsaw, a drill, a jigsaw, and a sandpaper.

  • Use a wood chisel and a mallet to
  • Cut a section of log that is the desired size and shape of the cutting board
  • Use a chainsaw to cut the desired shape out of the section of log

-The width of the log should be about twice the width of the finished cutting board. -Using a chainsaw or handsaw, cut the log into two pieces, one larger than the other. -On the narrower end of the larger piece, use a saw to cut out a rectangle that is the same size as the cutting board you want. This will be the board’s surface. -Use a chisel or knife to whittle down the four sides of the rectangle


Frequently Asked Questions

How Do You Make A Homemade Cutting Board?

Cutting boards can be made out of a variety of materials, but the most common are wood or plastic. You will need some basic tools – a saw, measuring tape, drill, and jigsaw – as well as a piece of wood that is at least 24″x12″. Start by measuring and cutting the board to size. If you are using a piece of wood that is not already cut to size, use the saw to cut it to the desired dimensions. Next, use the drill to create a hole in the center of the board that is at least 2″ in diameter. This will be used to hold the cutting board in place when it is attached to the countertop. Finally, use the jigsaw to cut around the

How Do You Make A Cutting Board Out Of Raw Wood?

There are a few ways to make a cutting board out of raw wood. One way is to use a jigsaw to cut out the shape of the cutting board, then use a router with a straight bit to round the edges. You can also use a bandsaw to cut out the shape of the cutting board, then use a belt sander to round the edges.

Can You Make A Cutting Board Out Of Any Wood?

Yes, most any wood can be made into a cutting board, though harder woods are more durable.


In Summary

A cutting board made from a log is a fun, easy project that can be completed in a weekend. The results are a beautiful, functional piece of art that can be used to chop vegetables or prepare food.

Leave a Comment

Your email address will not be published.